Call for a Quote: 778.852.0135
White Rock Painters | Abbott Painters

INSL-X White Rock

When you need to refurbish furniture, crown molding, trim, kitchen cabinets, or bathroom vanities, Cabinet Coat is a superb option. This application features outstanding adhesion and is suitable for painting hard surfaces. You can use it without a paint primer, even on varnish and polyurethane materials. This semi-gloss product levels and flows to create an extremely durable surface.



Basic Surface Preparation

To obtain the best results, surface regions need to be correctly prepared. All surfaces that'll be painted need to be dry, clean and free of waxes, mildew, oils, grease, dirt, or any surface contaminants. Work with soapy, warm water to clean away any dirt or chalk with some gentle scrubbing. A commercial wax stripper may be required if you are extracting surface wax. If you are dealing with oil or grease, using a specially formulated emulsifier will simplify the cleanup.

Preparing the piece is time-consuming; however, it will significantly improve your end result. First, lift off all peeling, cracking and loose chipping paint from surfaces that were painted before. Use sanders, wire brushes, hand-scraping tools, electric grinders and the proper tools to accomplish sanding. All metal pieces need to be free from chips, mill scale and rust deposits. Replace or repair any delaminated, weakened surface locations.

Next to the surface you will be painting, gently sand the rough paint boundaries. All high-gloss portions require sanding to generate light scratches and a dull finish so the paint can adhere properly. Completely vacuum once sanding is done to extract all debris or dust.

Application

Cabinet Coat can easily be applied with a paintbrush or a roller. You may use the HVLP method and spray this item but make sure it has been stirred diligently first. Strive to keep a wet paint edge as you apply by brushing or rolling into areas that were coated previously. Note this item dries rapidly. It might showcase roller markings or brush marks if overworked. Cabinet Coat provides the best coverage when it can be applied when the ambient and surface temperatures are lower than 90 degrees Fahrenheit and more than 50 degrees Fahrenheit. Don’t use this product if there is any chance of moisture touching down on the wet paint.



Clean Up Practices

Cleanup when your painting venture is complete by counting on soapy, warm water. Wash hands and soak your rollers and brushes and other equipment. Adhere to correct safety standards for disposing of the rinse water. Discuss with your local recycling centre to see if they take dry or empty paint containers. Check with your local sanitation department or bylaw to learn local disposal requirements. Consult your local environmental agency to uncover which disposal choices will be suitable.

Environmental Health & Safety Information

Specific air circulation is crucial at all times. Avoid inhaling the spray mist or sanding dust at all times. Make sure that there is a clean air entry for drying and safe application. Do not have any exposure to skin, or eyes. Stay resistant to spray mist and dust by choosing an approved NIOSH respirator. Use the respirator correctly by pursuing the manufacturer’s directions. Wash your hands before and after use and ensure the vessel is always closed once you are finished the application.



Know the FIRST AID Requirements Before Using

In the event of eye exposure, flush your eyes for at least fifteen minutes. Soapy water can help you clean up if any skin exposure takes place. Don’t wait to seek medical treatment if required. In case of breathing difficulty, get to fresh air ASAP and seek medical help if needed.

Call Us Today
778.852.0135


Articles & Resources

Stains Stains
Paint Roller Guide Paint Roller Guide
Picasso Proform Brushes Canada Picasso Proform Brushes Canada