Call for a Quote: 778.852.0135
White Rock Painters | Abbott Painters

Paint Trays and Buckets

Not surprisingly, lots of individuals don’t understand how to properly utilize a paint tray. Commonly, they pour a portion of the paint into the tray and begin using a paint roller. They soak the roller repeatedly and start painting. Nevertheless, using the paint tray as a recommended tool requires more details. Look into the guidelines to discover if you are utilizing your paint products properly; after all, they aren’t cheap! Teaching yourself can potentially save a lot of money and time.



Use the proper equipment. Employing the essential tools for the job makes it possible to be proud of your hard work. Being economical by using cheaper items can end up costing you much more in the long-run. While higher quality materials will cost a bit more, they are worth the money. If you can find the money to invest in professional paint products, it is worth it. You will have the ability to reuse most items various times if you stick to proper clean-up protocols.

Adequately blend the paint. Try to get your paint mixed via a paint mixer machine by a professional from the painting department at the store when you obtain it. Usually, the paint department will tint and professionally mix your paint about purchase. You will need to make use of paint fairly soon afterward. If you are not sure how well your paint is mixed, use a paint stirring stick and mix at a low speed. Mix well from the bottom of the can make certain there is no paint separation transpiring before you apply. Pour approximately a third of the paint right into the deep portion of your paint tray once it is all mixed.

Be certain to entirely cover the paint roller. Upon dipping the roller straight into the paint, ensure the entire paint roller is covered. Purely coating part of the roller or assuming the paint will saturate to the other side are popular mistakes. Refrain from spilling the paint by rolling slowly when you refill the paint roller. Defend your floor with newsprint, a tarp, or drop cloth and set your paint roller there when you need to.

Resting or drying your paint roller. As soon as your paint roller is thoroughly soaked with paint, it needs some time to rest or dry. This is just what the bucket screen or shallow section of your paint tray is for. Employ the bumps on the shallow end of your screen or paint tray to roll the roller and get rid of the excess paint. Once this phase is done, you can transfer the paint roller to the wall and start!

Get started on painting your new color. Start painting your walls approximately 1-foot from the bottom corner of your wall. Use a “W” pattern and come up and over the wall. Rely on steps 3 and 4 for re-filling your paint roller and topping up your paint tray until you are finished.



Thoroughly clean up your paint equipment when your job is completed so that you can rely on them again. When you are done painting for the day or the overall job, you need to clean your tools appropriately. This enables you to reuse your equipment many times. If you are not painting any time soon or don't have storage space, you'll be able to resell your equipment if it is in good shape. Look at your paint can for clean-up instructions on your latex or oil-based paint products since they differ from solvents or water.

Knowing how to protect your items can help you maximize your results and your expenditure. Stop wasting money and time on wasted paint and repurchasing equipment. Refurbishments cost enough as is! Help the planet as well as your budget by taking care of your paint materials to use them for countless years to come.

Call Us Today
778.852.0135


Articles & Resources

Trimaco White Rock Trimaco White Rock
Applying Caulking Applying Caulking
Why use a Paint Extension Pole Why use a Paint Extension Pole