You are going to enjoy faster painting clean-up simply using a paint tray liner. Once you are succesfully done painting, it is simple to pour any residual paint into the paint can. Carefully rinsing your paint tray lining will permit you to reuse it many times.



Latex and oil-based paint products and primers are common in most renovations. If the drywall is brand new, a latex primer ought to suffice on your walls. If you are painting over the surface of any previous water staining or wallpaper glue deposits that is unable to come off, an oil-based primer known as “Kilz” will seal your walls. This is an excellent item to kill mildew or seal mold and is a good choice for painting over oil-based wood stains that will bleed through layers of new paint. Primer is necessary for many different situations.

Lots of people prefer putting their primer into a metal paint tray. The oil-based primer often occupies the metal paint tray and a tray liner is used for latex paint in the exact same tray after to stop oil and water mixing. Take care of your paint tray liner by meticulously rinsing and drying it after your project. Do as instructed for cleaning located on your paint can and rinse off your paintbrushes with your paint tray liner after the job.

What is the difference between store-bought paint tray liners and DIY options?

Pre-formed to fit into your paint tray, the liners are affordable and accessible. These standard-sized pre-formed liners fit nicely into your paint tray. Don’t fall into believing that these are disposable or intended for single-use; they can be re-used for years! Wash and dry paint tray liners to have on hand for upcoming painting projects. They can last you for years of painting ventures. Don’t recycle a paint tray liner that has not been adequately cleaned. The excess paint can intermix with your new paint and trash your painting endeavor. You could have tiny globs of old paint intertwined into your new project. Stop the potential for disaster by cleaning your paint tray liner completely after each use.

If you prefer to get creative and not rely on plastic liners, read some DIY suggestions below.

Simply washing the tray liner clean after use helps prevent this mess.

Aluminum Foil paint tray liner DIY

Use a portion of aluminum foil that is approximately 6” bigger than your paint tray. Place the foil into the tray and tuck it into every one of the four corners. Fold the aluminum softly over the paint tray edges. This particular liner is very delicate. Care must be given not to rip the foil because it tears without much friction. The filled paint roller sleeve often clings to the foil. Miniature bits of aluminum foil can accidentally turn up on your wall or painted surface. Aluminum foil isn’t the most effective paint liner choice for large jobs. While you're completed painting, return the leftover paint into the can. Gently collect the foil by rolling it together and throw it in the garbage when finished.



DIY PAINT TRAY LINER WITH PLASTIC BAGS

You can use a disposable plastic bag or kitchen garbage bag for the next paint tray liner. Simply place the paint tray in to the bag. Then, turn the tray over and tape the plastic bag’s individual ends together. Pour surplus paint back into the can if you have any left in your tray after painting.

Clean up is a breeze. Remove the bag from the paint tray by extracting it inside out. If you're not planning on reusing your paint roller or washing it out, you can put it into the bag. Utilize the bag to tug the roller sleeve away from the cage. This will prevent you getting paint all over your hands. Next, make sure to tie your plastic bag closed ahead of placing it into the garbage. Place your bag inside the garbage after tying it shut first.

Are paint tray liners vital to your painting operation?

After all, you don’t require a paint tray liner. Many people choose to skip the liner and pour their paint directly into the tray. After you are done, pour the remaining paint back into the can. You could opt to allow the paint to dry instead of washing your tray out. As layers of paint collect, your paint tray can become heavy. However, if you can safely wash your paint tray instead that may be a better option. Some individuals argue that the new paint will dissolve the previously hardened layers and trigger paint bits to get stuck in the roller and destroy your smooth finish.

Since oil-based paints call for solvents for cleaning, many prefer to use paint tray liners. But, if you work with latex, you can avoid the liner since you will need to wash your paintbrushes with water afterward. Instantly fill your paint tray with water and add your brushes or rollers to soak once you finish with your latex paint to simplify cleanup. Enjoy your painting endeavor regardless of the method or products you choose.